* World-class measurement accuracy: Basic accuracy ±0.03%, DC accuracy ±0.05%, 50 kHz accuracy 0.2% (*1) * Accurately measure high-frequency, low-power-factor power: Current sensor automatic phase correction function (*2) * Safe evaluation of increasingly high-voltage solar inverters: 1500 V DC CAT II / 1000 V DC CAT III (*3) * Accurate capture of power fluctuations caused by high-speed switching: Sampling performance 18-bit, 15 MHz, Noise Resistance (CMRR) 110 dB, 100 kHz (*1) * Simultaneous analysis of 4 motors: 4-motor/2-motor simultaneous analysis function * Earning Japan Calibration Service System (JCSS) Certification for DC Power Measurement. (*4) * Up to 8 power channels optimizing your measurement: 8-channel power measurement * Integration of measurement data into CAN networks: CAN or CAN FD output function

• ±0.04% basic power accuracy, among the best in its class • 200 kHz measurement band with flat amplitude and phase accuracy that extend to high frequencies • Remarkably small and light footprint, enabling high-accuracy measurement to be easily carried out even in the field • High-accuracy, high-speed calculation of transient-state power in 50 ms; harmonic analysis; display of instantaneous waveforms; noise analysis; and simultaneous parallel calculation of all parameters, including efficiency loss • Send measured values to HIOKI data loggers using a Bluetooth® wireless technology compatible adapter (LR8410 Link-compatible products) • Simultaneous measurement of multiple circuits and ability to acquire synchronized data using up to 8 devices (for 32 channels) • Simple power measurement using clamp-on current sensors • Measurement of current and power inputs and outputs as part of the new WLTP fuel efficiency international standard

• Exclusive current sensor phase shift function lets you maintain accuracy even in high frequency, low power factor applications • Basic accuracy of ±0.02%*1 for power measurement *1 PW6001 accuracy only. Instrument delivers accuracy of ±0.07% even after the current sensor accuracy has been added. • High noise resistance and stability (80 dB/100 kHz CMRR, ±0.01%/°C temperature characteristics) • Accurate measurement even when the load is characterized by large fluctuations; TrueHD 18-bit resolution • 10 ms data refresh while maintaining maximum accuracy (using a specially designed IC to make all measurements independently while performing simultaneous calculations.) • DC accuracy of ±0.07%, which is key for stable, accurate efficiency measurement • Wide frequency bandwidth of DC, or 0.1 Hz to 2 MHz • Achieve true frequency analysis with high-speed 5MS/s sampling (18 bit) • Synchronize 2 units for up to 12 channels*2 in real time *2 Two 6-channel models can be connected with an optical connection cable • Special triggers to enable waveform analysis and motor analysis without the need for an oscilloscope • Wideband harmonic analysis up to the 100th order with a 1.5 MHz band • Send measured values to HIOKI data loggers using a Bluetooth® wireless technology compatible adapter (LR8410 Link-compatible products), Ver. 2.0 and later

• Compatible with the SPECpower® benchmark for server power consumption SPECpower® is a registered trademark of Standard Performance Evaluation Corporation • Measure DC and single-phase 2-wire to 3-phase 3-wire with 2-channel input • For development and production of motors, inverters, power conditioners, power supplies, and other devices • High-precision basic accuracy of ±0.1 % (*1) (*1) For complete details, please refer to the specifications • Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC • High-current measurement up to 65 A of direct input • Harmonic measurement up to the 50th order according to IEC 61000-4-7 • High-accuracy measurement, even with a low power factor for no-load testing of transformers and motors • Built-in external sensor input terminals to measure up to 5000 A AC • Synchronize up to 8 units for multi-unit measurement

• Compatible with the SPECpower® benchmark for server power consumption SPECpower® is a registered trademark of Standard Performance Evaluation Corporation • High-precision ±0.1% basic accuracy (For complete details, please refer to the specifications) • Wide 1mA to 20A measurement range, max. continuous input of 30 A • Wide frequency bandwidth of 0.1 Hz to 100 kHz or DC • Measure harmonic and standby power consumption according to IEC62301 • Achieve superior accuracy even with a low power factor for no-load testing of transformers and motors • Synchronized control using up to 8 instruments • Built-in external sensor input terminals to measure up to 5000 A AC (PW3335-03, PW3335-04 only) • Send measured values to HIOKI data loggers using a Bluetooth® wireless technology compatible adapter (LR8410 Link-compatible products, Ver. 1.1 and later, the PW3335-01 is not supported)

• Ideal for replacing portable instruments, ±0.1% basic accuracy • Extended period of guaranteed accuracy of 3 years • 50mA to 20A AC current range (300 V Max., Accuracy guaranteed up to 30 A) • Print out with the 9442 and RS-232C interface