Data Acquisition, Oscilloscopes, Memory Recorders
Products Categories
MEMORY HiLOGGER LR8450-01 (Wireless LAN model)
1ms Sampling Portable Logger Expandable to 330
Channels with Your Choice of Plug-in or Wireless Input Modules
• Wireless LAN model expandable to 330 ch with wireless and plug-in units
• Record voltage output from pressure and other sensors with 1ms sampling speed
• Directly connect strain gauge and measure signals in as fast as 1ms intervals
• Significantly reduced effects from noise let you safely measure in high voltage and high frequency areas such as around inverter motors
• Avoid wiring issues by minimizing cable length using wireless units
• Monitor data captured remotely on PC with wireless LAN technology
WIRELESS LOGGING STATION LR8410
Wireless Multi-channel Data Logger Captures Up to 105
Data Points via Bluetooth®
• Capture logging data using Bluetooth® wireless technology. Install logging modules in hard-to-reach locations (over line-of-sight distances of up to 30 meters *1 )
(*1) The presence of obstructions may shorten this range. In addition, radio wave intensities, which are indicated with the antenna-like indicators, vary depending on units even while these units are operating in the same environment.
• Measurement units have built-in buffer memory so that measurement data can be saved if communication is temporarily disrupted.
• Choose an input unit based on the parameters you wish to measure (15-channel and 2-channel units are available)
• Easily add up to 7 input units wirelessly to keep your environment free of tangled wires (for a total of up to 105 channels when using 15-channel units)
• 100 msec simultaneous sampling across all channels using rapid scanning method
• Quick Set guide makes configuration a breeze
• Can receive data from LR8410 Link compatible products (Ver. 1.40 or later)
MEMORY HiLOGGER LR8431
Featuring USB Flash Drive and Improved Accuracy!
Your Personal 10-channel Logger
• Record measurement data on a USB flash drive for easy transfer to a computer
• Record to reliable Compact Flash cards during long-term measurement applications for increased peace of mind
Replace storage media during real-time recording
• Improved thermocouple measurement accuracy and reference junction compensation accuracy
• Ten isolated analog input channels
• 10 ms sampling and recording across all channels
• Noise-resistant measurement circuitry for improved readings
• Ultra-compact for convenient portability
• Widescreen, bright LCD gives excellent viewability
MEMORY HiLOGGER 8423 Series
600-channel Data Logger with 10ms Sampling
• Capture data with 15 to a maximum of 600 channels
• Send data to the PC in real time
• Isolated to sustain up to 600 V between modules and earth
• USB 2.0, LAN 100BASE-TX, store to 1GB PC Card
• Simultaneous fast- and low-speed sampling allows for media storage space efficiency
HEAT FLOW SENSOR Z2012-01 to Z2017-01
Sensor with Thermocouple that can Simultaneously
Measure Temperature and Heat Flow
• Built-in K thermocouple in heat flow sensor, simultaneous measurement of temperature and heat flow with a single sensor
• Increased work efficiency since heat flow sensor and thermocouple can be affixed in a single step
• Measure the movement and volume of heat energy with Model LR8432 Heat Flow Logger
• Waterproof heat flow sensor that can measure curved surfaces (Minimum radius of sensor curvature 30 mm (1.18 in))
• Isolation of heat generated and dissipated in automotive parts
• Evaluate the thermal performance of building materials
• Measure the energy efficiency of consumer electronics
• Study the impact of body heat
• Index temperature fluctuation in agriculture and civil engineering
HEAT FLOW SENSOR Z2012 to Z2018
Choose from 4 Sizes, Waterproof Heat Flow Sensors
that can Measure Curved Surfaces
• SS size ideal for measurement of small parts such as electronic parts• Measure the movement and volume of heat energy with Model LR8432 Heat Flow Logger• Waterproof heat flow sensor that can measure curved surfaces (Minimum radius of sensor curvature 30 mm (1.18 in))• Isolation of heat generated and dissipated in automotive parts• Evaluate the thermal performance of building materials• Measure the energy efficiency of consumer electronics• Study the impact of body heat• Index temperature fluctuation in agriculture and civil engineering
HEAT FLOW LOGGER LR8432
Compact & Lightweight Heat Flow Logger for Analyzing
the Causes of Temperature Change
• Use a heat flow sensor to measure the movement and volume of heat energy
• Measure of temperature and voltage
• Record measurement data on a USB flash drive for easy transfer to a computer
• Record to reliable Compact Flash cards during long-term measurement applications for increased peace of mind
• Ten isolated analog input channels
• 10 ms sampling and recording across all channels
• Record raw waveforms and post-calculation waveforms at the same time. (Heat transmission coefficient processing)
• Two graduations can be displayed with a double gauge
MEMORY HiCORDER MR8740T
Max. 108 Analog Channels, Reduce Inspection Data
Transfer Time to Zero
• Ideal for multipoint inspection of high performance boards such as ECU
• 108ch analog to 96ch analog + 48ch logic input
• Reduce time required to save to external media to max.1/100 compared with conventional method
• 20 MS/s simultaneous sampling on all channels
• Safe measurement with all analog inputs isolated
• Supports 4K monitor to display multi-channel waveforms without overlapping
• Measure 4 channels with 1 unit (4 ch analog Unit U8975, 4 ch DVM Unit U8991)
• Generate constant voltage, constant current, and simulated resistance (VIR Generator Unit U8794)
MEMORY HiCORDER MR6000
Highest Measurement Capabilities and Fastest Transfer
Rate in History
• High-speed 200 MS/s isolated testing (with High Speed Analog Unit U8976Ax8)
• Simultaneously measure up to 32 analog channels (with 4ch Analog Unit U8975x8)
• Real-time saving of data of all 32 ch at 1 MS/s (with SSD Unit U8332)
• Highly-responsive touchscreen
• Memory Concierge: Easily search for the waveform you want to see with the waveform search function
• Faster save times (1/10th the time required by legacy models)
• Real-time digital filter calculation
MEMORY HiCORDER MR8847A
High-speed 20MS/s, 16-channel, Fully Isolated Memory
Recorder for On-site Jobs and R&D
• Supports a wide variety of measurements with a total of 13 plug-in modules
• Generate and record with a single unit
• Direct 1000 V high voltage input testing
• High-speed sampling up to 20MS/s with fully isolated inputs
• 16 analog + 16 logic channels to 64 logic + 10 analog channels
• High-speed sampling with waveform judgement function
• Soil-resistant construction strong against adverse working environments
• Big buttons coated to withstand industrial oil and residue
• Drop-in paper loading and one-touch setup, along with high-speed 50mm/s printing
MEMORY HiCORDER MR8827
High-speed 20MS/s 32-channel Fully-isolated Memory
Recorder Provides Simultaneous Data Acquisition
Over 32 Analog + 32 Logic Channels
• Generate and record waveforms with a single unit
• Output previously recorded problematic waveforms and apply to devices under test to simulate potential issues
• 32 analog + 32 logic channels to 28 analog + 64 logic channels
• High-speed sampling up to 20MS/s with fully isolated inputs
• Safe measurement with all isolated analog inputs
• Large capacity memory of total 512M-words
• Measure various system signals from high voltage to ultra low voltage simultaneously
MEMORY HiCORDER MR8741
Single-device Solution for Waveform Recording and
Generation,
High-speed 16-channel/Isolated Multi-channel System
Recorders (rack-mounted)
• Introducing the DVM Unit MR8990 with high 24-bit resolution! Perform high-speed, high-accuracy measurement without going through a scanner.
• Support for multi-channel measurement (MR8741: up to 16 ch)
• Isolated input (between input channels; input-to-chassis isolation: maximum input-to-ground rated voltage of 300 V AC/DC)
• High-speed sampling (max. 20 MS/s)
• Ideal for rack-mounting (4U height/within 180 mm; display-less, box-type design)
• Display waveforms and make settings on a DVI-D connected monitor and mouse
• Remote measurement via LAN using control commands from a PC
MEMORY HiCORDER MR8740
Single-device Solution for Waveform Recording and
Generation,
High-speed 54-channel/Isolated Multi-channel System
Recorders (rack-mounted)
• Introducing the DVM Unit MR8990 with high 24-bit resolution! Perform high-speed, high-accuracy measurement without going through a scanner.
• Support for multi-channel measurement (MR8740: up to 54 ch)
• Isolated input (between input channels; input-to-chassis isolation: maximum input-to-ground rated voltage of 300 V AC/DC)
• High-speed sampling (max. 20 MS/s; with 54-ch type, simultaneous sampling of up to 32 ch)
• Ideal for rack-mounting (4U height/within 180 mm; display-less, box-type design)
• Display waveforms and make settings on a DVI-D connected monitor and mouse
• Remote measurement via LAN using control commands from a PC
MEMORY HiCORDER MR8875
1000V Direct Input, Portable 16-channel Memory
Recorder for Data Acquisition During Vehicle Testing
with Direct CAN Bus Input
• 1000V input and instantaneous DC or RMS waveform measurement with new Analog Unit MR8905
• Multi-channel logger capable of thermocouple temperature measurement up to 60 ch at 10 msec intervals
• Measure multiple channels simultaneously despite handheld portable design
• Max. 2 μsec high-speed simultaneous logging for all input channels
• Save directly to the SD Card in real time for uninterrupted long-term logging
• 16-bit high-resolution measurement of voltage, temperature, distortion and CAN signals
• FFT calculation, waveform calculation functions for advanced analysis
• Intuitive touch screen for optimal operability
• Tough against vibrations and extreme temperatures, with strengthened body ideal for in-vehicle testing and road tests
• 3 different power supplies
MEMORY HiCORDER MR8870
Oscilloscope-like Waveform Observation, Plus
Recording of RMS Variations – In a Single Device
• Mode for recording instantaneous waveform and RMS fluctuations
• Save values in real time to a CF card
• Record four channels at once by synchronizing two instruments with the bundled PC application
• Compact and easy to carry
• Easy, intuitive operation
• Fast, 1MS/s performance despite the compact size
• Built-in, compact-yet-sharp QVGA-TFT wide LCD
MEMORY HiCORDER MR8875
1000V Direct Input, Portable 16-channel Memory
Recorder for Data Acquisition During Vehicle Testing
with Direct CAN Bus Input
• 1000V input and instantaneous DC or RMS waveform measurement with new Analog Unit MR8905
• Multi-channel logger capable of thermocouple temperature measurement up to 60 ch at 10 msec intervals
• Measure multiple channels simultaneously despite handheld portable design
• Max. 2 μsec high-speed simultaneous logging for all input channels
• Save directly to the SD Card in real time for uninterrupted long-term logging
• 16-bit high-resolution measurement of voltage, temperature, distortion and CAN signals
• FFT calculation, waveform calculation functions for advanced analysis
• Intuitive touch screen for optimal operability
• Tough against vibrations and extreme temperatures, with strengthened body ideal for in-vehicle testing and road tests
• 3 different power supplies
MEMORY HiCORDER MR8880
Capture High- to Low-Voltage Signals in a Single
Device! Rugged, Professional and Ready for the Field
• CAT III 600V isolation performance; directly measure a 480V power line
• 4 completely isolated channels let you simultaneously record data on a 3-phase power line plus have one extra channel
• Tough against harsh environments; -10°C to 50°C operating temperature range
• Built to withstand mechanical shocks and vibrations (ships standard with side protectors)
• Make settings easily with PRESETS function
PEN RECORDER PR8111, PR8112
• Easily portable, compact size
• Support for three power sources, can be powered with dry-cell batteries
• Protection from dripping water and dust, ships with a drip-proof cover
• Pen-based, records data reliably
• Easy enough for anyone to use
VIR GENERATOR UNIT U8794
Generation unit can be used for various simulation tests
instead of sensor output
• As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, inspection of electronic parts, equipment maintenance
• DC voltage, DC current, and resistance simulation output
• In resistance generation, the voltage to be connected is measured, the output current is calculated from the set resistance value, and simulated output
• Used in combination with Memory HiCorder series MR8740T (not available in other models)
• Isolation between each output channel and between channel and chassis
Request Quote NON-CONTACT AC VOLTAGE PROBE SP3000
Capture Voltage Signals from Outside the Wire Cover
• Observe waveforms with an oscilloscope or a Hioki Memory HiCorder by visualizing signals from electric equipment simply by applying the probe to the wire’s insulation
• Capture LIN and other communications signals
• Measure signals from electric equipment on vehicles
ARBITRARY WAVEFORM GENERATOR UNIT U8793
Output the signal the recorder measured, which is ideal
for abnormality simulation test
• Output arbitrary waveform signals up to 2 channels
• Output problematic waveforms recorded with the Memory HiCorder up to 15 V
• Output customized arbitrary waveforms signals up to 15 V
• For use with Hioki Memory HiCorder series (cannot use with 8847 or MR8847)
• Built-in function generator and sweep function
• Isolated between unit and output, and between all channels
PULSE GENERATOR UNIT MR8791
Pulse Generator Input Module for Control Simulation
Testing
• Output pulse waves, pattern waves up to 8 channels per unit (output signals of TTL level, or open-collector)
• For use with Hioki Memory HiCorder series (cannot use with 8847 or MR8847)
• Isolated between unit and output (Not isolated between each channel (common ground))
WAVEFORM GENERATOR UNIT MR8790
Waveform Generator Input Module for Control
Simulation Testing
• Output sine waves (20 kHz max.) and DC voltage signals up to 4 channels per unit
• Output signals up ±10V or 5mA
• For use with Hioki Memory HiCorder series (cannot use with 8847 or MR8847)
• Isolated between unit and output, and between all channels
DIFFERENTIAL PROBE P9000
Easily Connect to Hioki Memory HiCorders and
HiLoggers for High Voltage Testing
• Compact probe for CAT III 1000V environments
• Wave mode: Observe instantaneous waveforms
• RMS mode: Observe RMS value waveforms
• Principal areas of use
1. High-voltage battery circuits in EVs, HEVs, and other automobiles
2. High-voltage circuits in energy-related equipment such photovoltaic cells
3. Commercial power line circuits (480 Vrms, etc.)
4. High-voltage surge noise from inverters, motors, solenoids, etc.
LOGIC PROBE MR9321-01
Detect AC/DC voltage with Memory HiCorders
• 4 isolated channels
• ON/OFF detection of 100V/200V AC voltage, or 24V DC
• Detect of voltage interruptions on power line
• High speed response of rise time of 1ms, fall time of 3ms
• Connect to a Memory HiCorder with miniature terminal
CAN ADAPTER 8910
Convert CAN Bus Signals Across 12 Channels
and Further Analyze Using Recorders or Data Loggers
• Select CAN-Bus information and convert them into analog/logic signals to input into your recorder or data logger
• Record both CAN adapter analog output and actual analog data (i.e. sensor output) simultaneously
LOGIC PROBE 9327
Detect the Presence of Voltage or Relay Contact Signals
with Memory HiCorders at High-speeds
• Detect Hi/Lo voltage or relay contact signals
• 4 channels with common ground
• Switch between digital or contact input
• 3 thresholds for digital input (+1.4/+2.5/+4.0V)
• Supports pulse widths as narrow as 100ns using high speed response
• Miniature connector
DIFFERENTIAL PROBE 9322
High Performance Differential Probe Supports 3 Types
of Measurements
• Floating measurement of high-voltage waveforms (DC mode)
• Detection of power supply surge noise (AC mode)
• RMS rectified output (RMS mode)
• Main Applications
1. Measure potential differences included in common mode voltages, such as IGBT
2. Measure commercial power line waveforms, such as on 400V power lines
3. Measure high voltage surge noise waveforms
4. Measure the RMS value of inverter output, etc.
LOGIC PROBE 9320-01
Detect the Presence of Voltage or Relay Contact Signals
with Memory HiCorders
• 4 input channels (Not isolated)
• For ON/OFF detection of voltage/contact signals
• Select from 3 steps of input thresholds
• Response pulse width of 500 ns or more
• Compatible with Memory HiCorders featuring a miniature terminal
FlexPro
FlexPro – Advanced Software for Analysis and
Presentation of Memory HiCorder Data
• Search through large amounts of data at lightning fast speeds for the MEMORY HiCORDER Series
• Use your analyses on any number of measurements at the click of a button.
• Share your analysis templates with colleagues over your network.
iPad App for Memory HiCorder HMR Terminal
Analyze Memory HiCorder waveforms right on your iPad
• Free app (exclusively for iPad) downloadable from the App Store
• Freely control waveforms using iPad’s gesture controls
• Multi-channel support – up to 32 channels (with MR8827, MR8740) of waveform data at your fingertips
• Supports MEM data from the MR8740/8741, 8847, MR8847, MR8847A and MR8827
• Operate the Memory HiCorder via network
You can change settings, and monitor waveforms during measurement.
*New function on Ver 2.0
Data can view by the iPad using Hioki’s dedicated apps available from the Apple Store.
Search for “HIOKI” and download the “HMR Terminal” app.
MEMORY HiVIEWER 9725
Windows Software Provide Advanced Analysis of
Measurement Data Recorded by the Hioki 8860 Series
Memory HiCorders
• Application software enables you to perform the same data analysis on a Windows computer as on the 8860 Series Memory Hiccorders.
• No confusion, because the screens appearing on the computer are identical to those of the 8860 Series.
• Functions identical to those of the 8860 Series, such as waveform processing calculation, run on the computer.
WAVE PROCESSOR 9335
Display, convert, calculate, and print waveforms with a
PC
• Display, print, convert, and calculate on large volumes of waveform data (recorded in the Memory HiCorder Series)
• Display waveform screens, X-Y graphs, and numerical results
• Comprehensive search function
• Rich printing and hard copy functions to assist in creating reports
• Save in CSV format and export to spreadsheet application (EXCEL)
LAN COMMUNICATOR 9333
Networking Software Lets You Remotely Control
Memory Recorders via a LAN Connection
• Collect waveform data
• Remotely control Memory HiCorders with a PC
• Save data in CSV format and export to spreadsheet applications
Test
• Max. 32ch analog to 64ch logic • 20M-Sampling/s • 12-bit/16-bit A/D resolution • Operation testing and evaluation of inverters and UPS during load fluctuation and switching • Analyze the relationship between engine control and vibration during vibration testing • Identify power fluctuations when power supply is cycled
MEMORY HiCORDER MR8847A
• Max. 32ch analog to 64ch logic
• 20M-Sampling/s
• 12-bit/16-bit A/D resolution
• Operation testing and evaluation of inverters and UPS during load fluctuation and switching
• Analyze the relationship between engine control and vibration during vibration testing
• Identify power fluctuations when power supply is cycled
MEMORY HiCORDER MR8875
• Max. 16ch Analog + 8ch Logic
• 60ch scanner
• 500k-Sampling/s
• Measure acceleration fluctuation in automobiles, transportation equipment and industrial robots
• Performance and durability testing
• Inverter and motor testing
MEMORY HiCORDER MR6000
Max channels32 Analog ch to 128 Logic ch
Max. Sampling rate200 MS/s (high speed)
Memory capacity1G-Words
- Test ECUs, inverters and motors
- Measure large currents in fields of solar power, EV/HEV/PHEV development
- Measure inverter and switching power supply signals with direct input
MEMORY HiCORDER MR8740T
• Max. 108ch Analog to Max. 96ch Analog + 48ch Logic
• 20M-Sampling/s
• Test high performance ECU boards
• Multi-point testing of engine, driving, and ride comfort management systems
• Record signals captured by various sensors to identify air flow, throttle, torque, speed, vibration, humidity, etc.
